one sweep of the M360 is perfect, the other half of the sweep is faint or non existent. ive switched head units and even M360's on this boat and still the problem persists. ive checked voltage and rewired the connections and thats all good. suggestions?
There is NO substitute for time on the water!
I had new 360 do that last year. I was able to return it and get a different one. otherwise I would of had to send it to humminbird for repair
and the new one didnt do it?Originally Posted by bassin74
There is NO substitute for time on the water!
yes the 2nd one was good to go. something was bad in the first one.
Are you using a Y cable?
no sir
There is NO substitute for time on the water!
OK, so let me make sure I have the facts straight...
1) You connected the original Mega 360 to a different Helix/Solix/Apex (you didn't say which one) and one side of the image was still bad... correct?
2) You replaced the Mega 360 with a different Mega 360 and one side of the image was still bad... correct?
3) You don't have a Y Cable... correct?
If all three of the above are correct, then the Transducer cable is the only thing it could be.
If all three of the above aren't correct, then please clarify.
---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
- Apex 19/16/13, Mega 360, and Mega Live
- Minn Kota Ulterra Quest Trolling Motor
- (2) Cannon Optimum Bluetooth Downriggers
- Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers
If you’re using the mega 360 with a helix unit then it could be the helix adapter pigtail. Solix and apex units use a different cable.
all are correct
There is NO substitute for time on the water!
thanks for the replies
There is NO substitute for time on the water!
Reply With Quote