1 to 3 bobber stoppers above and below the weight…easily adjusted. One knot. Amount of weight totally depends on cover and depth. Bobber stoppers are dirt cheap on Amazon.
1 to 3 bobber stoppers above and below the weight…easily adjusted. One knot. Amount of weight totally depends on cover and depth. Bobber stoppers are dirt cheap on Amazon.
3 knots.
"The man of system is apt to be very wise in his own conceit; and is often so enamored with the supposed beauty of his own ideal plan of government that he cannot suffer the smallest deviation from any part of it…He seems to imagine that he can arrange the different members of a great society with as much ease as the hand arranges the different pieces upon a chessboard.” Adam Smith, The Theory of Moral Sentiments
This is the way I do it. I'll also do the same with a T rig sometimes. Can turn it in to a CR or back to a T rig on the fly.Originally Posted by dean c
Same. I keep them pre-tied on a leader keeper, like Lindy sells.
John
Same here I carry them pre-rigged and then 1 knot off to the races
1990 374V Ranger Still kickin' bass after all these years
Three knots
Three knots with a bobber stop, weight, brass clacker, then the swivel. No bead, I feel like they crack and fray the line easier.
Three knots and 1 oz. I want it on the bottom so why wait around for a ½ oz. to get there?
I have used a C keeper for lighter weight and smaller baits...sort of like a split shot rig, but not often.
Don't worry Ma'am....
I'm only here for the Bass.
3 knots. You can tie all 3 in a Palomar if you tie leader to swivel first
3 knots, always have a tube prerigged with about a dozen leaders with swivels and use a snap on my main line. Quick to change out leaders and just retie the snap knot when needed.
3 Palomar knots, its hard to teach an old dog new tricks
Carolina keeper does fine. If you are using a heavier weight, just use two keepers.
3 Knots. 1/2 oz. weight. 2 clear faceted beads. Mono Leader. Spro Swivel. Mainly a 5/0 Offset Round Bend. Assorted baits. If I am throwing it for spots I use a 3/0 Round bend. 16lb Fluoro main line. I really like using the Reins Tungsten weights with the insert. NRX CRR rod.
2020 Caymas CX20
I rig with the bobber stops like dean c talked about above i have used this style for years
C keepers work but for heavy weights you need 2 of them
THIS
Same here.
"the liberties of the American people were dependent upon the ballot-box, the jury-box, and the cartridge-box; that without these no class of people could live and flourish in this country..."
I chuckled
Correct.. and the only way imo
2020 Skeeter ZX150
Reply With Quote
