-
No gauges
2003 hdpi no volt, power trim and tack gauges.No reading from any of them. This is on a skeeter 2003 zx 200. Went out during winter storage. Any place to start will help .Thanks
-
Mouse chewed through master power switch wire.
Fuse for master power blew or corroded in fuse holder.
-
the guages are powered thru the keyswitch make sure when you turn the key to on you have power it has 4 wires coming off the switch black is ground green goes to gray for trim sender an i think the yellow or red powers with the key.
-
Check the fuses on the motor.