Results 1 to 3 of 3
  1. 03-10-2024, 08:22 AM #1
    Pafish Pa
    Pafish Pa is offline
    Member
    Join Date
    Mar 2019
    Location
    Ohio
    Posts
    14

    Raptor Hyd lines

    My Vexus got totaled in a Car accident, I removed the 8ft Raptors and now need to install on a different Vexus. I've watched videos on installation of new Raptors where they have color coded plugs on the Hyd. lines, but mine do not. Can someone take a look at there's and tell me which hose goes where on the pumps? I will also have to buy rubber grommets for the splash well and a qt of Hyd fluid. Thanks
    Reply With Quote Reply With Quote
  2. Pafish Pa
    Pafish Pa is offline
    Member
    Join Date
    Mar 2019
    Location
    Ohio
    Posts
    14
    #2 03-10-2024, 03:29 PM
    Welp, I found the info online. It looks like the Hyd fitting on the left side of the pump controls the UP function and on the right the DOWN position, so with that I'm assuming the line in the top of the Raptor cylinder is the Down line and bottom the Up line.
    Reply With Quote Reply With Quote
  3. Bradrodfish
    Bradrodfish is offline
    Member
    Join Date
    May 2008
    Location
    Pierre Part, La
    Posts
    4,352
    #3 03-13-2024, 08:19 AM
    If you look at the pump diagram then you will see the up and down.Diagram#1. From my perspective if you look at the Raptor diagram #2 the bottom connect will extend the Raptor and the top will retract it. Up is retract and down is extend.


    https://motors.johnsonoutdoors.com/p...57140_-_2020/y

    https://motors.johnsonoutdoors.com/p...57140_-_2020/y
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »