Help me find rubber molding for a Skeeter trailer please.

[RealtorRob]

Hi. There are always a few of you guys smarter than me . So I need some help again. I have a 2015 Skeeter FXi 21 on a Skeeter trailer. The molding that fits over the fiberglass fender and over the carpeted fender side panel needs replaced. I had a dealer call Skeeter and Skeeter says they didn't make the trailer so call the trailer manufacturer . I did . That would be EZ Loader. I called them and they said Skeeter provided the fenders and components on the fiberglass fenders. That makes sense as the fiberglass fenders matched the boat colors. So I call Skeeter and they aren't really caring about helping on such a small item I guess. So guys, where do I find something close to the rubber molding that is shown in the pictures? I sure would appreciate any help. IMG_5814.jpgIMG_5815.jpg

[paulrodbender]

I'm sure you can find it online.....

Not sure if this will help.
https://www.googleadservices.com/pag...ECAAQOQ&adurl=

[CastingCall]

Can't tell from the pics what the profile looks like - you'll have to measure how thick the material is that the edge trim needs to cover.

McMaster-Carr carries lots of "edge trim" in different materials and profiles.

Also search Great Lakes Skipper for "molding".

[RealtorRob]

I'm sure you can find it online.....

Not sure if this will help.
https://www.googleadservices.com/pag...ECAAQOQ&adurl=

Thank you

[RealtorRob]

Can't tell from the pics what the profile looks like - you'll have to measure how thick the material is that the edge trim needs to cover.

McMaster-Carr carries lots of "edge trim" in different materials and profiles.

Also search Great Lakes Skipper for "molding".

Thank you.