EXDCR HOOK REVERL 50/200 HDI

[Fishingnightmare]

Hi
I am new to lowrance and some of the transducer and the way the add words the unit.
I ordered the triple shot on a hook 7 , the unit did not work , sent it back got the hook reveal 9ss , triple shot was out of stock so I selected the wide angle high chirp sonar + down scan
This in the label on the transducer.
EXDCR HOOK REVERL
50/200 HDI
do I select (split shot ) for the transducer ? Or pick an hdi one ? From the units selection list.
Thanks

[Team Colibri]

You pick the transducer you have, the 50/200-HDI (also called low/high-HDI).

That transducer is far from «wide angle» though. It has a narrow cone designed for fishing in deeper water than the typical bass-guys. Typically you would want the 83/200-HDI for such use.

[Fishingnightmare]

Hi Team Colibri
In sonar menu do i select HDI L/H-9 as my transducer?
Here are my options.
Generic 50/200kHz
Generic 83/200kHz
TOTAL SCAN M/H
HDI L/H-9
HDI M/H-9
AI 2-in-1
AI 3-in-1

Generic 83/200kHz
TOTAL SCAN M/H
HDI L/H-9
HDI M/H-9
AI 2-in-1
AI 3-in-1
TripleShot
SplitShot
I am orginaly from Florida and I am worn out on bass.
I am now fishing for fish in NC that are not in Florida and I Love fishing deep.
And i am catching bass in the 50'+ water depth.
Thank you for the Help

[Team Colibri]

HDI L/H-9 would be correct. (L for Low, based around 50kHz. H for High, based around 200kHz.)

[Fishingnightmare]

Thanks for the help Team Colibri .