You have an awesome trolling motor, but now you need to find a way to install it securely AND in a good location on your deck.....

Do you have a challenging trolling motor installation because of the design/layout of your boat's deck? The shaft should deploy as close to the center line as possible.

Are you looking for a simple way to PROTECT and keep your expensive trolling motor safe when not in use?!

Our custom RETRACTABLE mounts can offer you a simple solution for you! Lifetime warranty on all retractable mounts! www.shuttleslide.com

ShuttleSlide easily retracts your motor into the boat (you decide how much retraction you need - the "one-size-fits-all" option doesn't always work). Our mount can sit further back on the deck, where it's flat (making the installation easier) and when installing a 7" or 9" UHD or EXD mount, there are only 4 NEW holes in the deck.

How is ShuttleSlide trolling motor mounts different from the others?

If you have a smaller trolling motor, you won't need the same mount as a customer with a 87" or 100" shaft

We offer a cost effective way to mount the trolling motor, at different price points, starting at $190

You do not have to purchase a separate quick release bracket (they can be expensive nowadays), and you can still easily / quickly remove the motor off the mount and your boat

Our mounts can place the shaft in-line with the gunwale when stowed and the trolling motor then slides straight forward to the water to deploy

We give you many options on how much RETRACTION you need for your trolling motor, some people don't need as much as others...it's YOUR choice

We offer a strong mount, backed by a LIFETIME warranty (and not just a simple 1 yr or even 5 yr warranty)

Our EXD mounts can easily handle any trolling motor with a shaft up to 108" in length (*EXD mounts start at $350. - so you don't need to spend $$$)

We offer a discount to Bass Boat Central members, please mention this post or the fact that you saw our information on Bass Boat Central!

Our product was first developed in 2016 for anyone who dislikes the fact that their trolling motor OVERHANGS the rub rail by several inches. The new Minn Kota Quest trolling motors now overhang by 11 - 12 inches!

We have a great solution. Big boat, little boat....our mount is very versatile.
Are you ready to speak to us about your installation? 321.345.3315 - our knowledgeable staff will answer your questions. www.shuttleslide.com

Email us some pictures of your deck and we will give you some options. Email to: support@shuttleslide.com

Ulterra_NitroZ20.jpg

Riptide_patherfinder_12HD.jpg

Terrova_Lake&Bay_BocaGrande..jpg

Terrova_Lake&Bay_BocaGrande...jpg

Powerdrive_onalaskaoutboards_9HD.2.jpg

Terrova_bassboat2.jpg

Terrova_Xpressbayboat.jpg
haswing_skiff.jpg

Quest_triton_12exd.jpg