Hello, I'm installing a livescope system on my boat currently. I ran a new power harness with 8 gauge wire, a dedicated shutoff switch and 7.5 amp fuses.
When I have everything hooked and and power on the GPS 10, the red status LED comes on once for <1 second, then goes black. I have the network cable (red connector) installed and tight. Obviously, the has unit says "No Network Source Found". Do I need to reset the head unit or is there possibly singing what going on?
I looked online and Garmin's troubleshooting guide for the LED does not list my blink condition.
I've included a small clip.
Thanks in advance for any direction I can go in trouble shooting the issue.
Edit, can't upload video to the board directly. Trust me, one red blink and it goes dormant.PXL_20231208_222634037.jpg