I have a Helix 15 SI at the Bow connected to M360 and Ultrex MDI transducer via Y cable. I find I don't use 2D or MDI up front, so was thinking of disabling the pinging of those sonars by selecting only M360 as the connected transducer in the sonar menu, instead of including the built-in transducer as I now have it. Am I correct in assuming that the Helix will then only ping the M360 ?
2020 Caymas CX20 Pro, Mercury Pro XS 250 4 stroke, SN 2B735045
Helix 15 msi G4N, Helix 12 msi G3N, Helix 12 mdi G4N, Solix 12 G1
Mega 360, Mega Live w/ Targetlock, 8' Raptors,
Minkota Ultrex 112 w/Ipilot Link, (2) 5 Port Switches
Yes select MEGA 360 in the Connected Transducer menu. That is the default when the MEGA 360 is detected.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
You will not have a depth reading from only the 360 tho.
That's right. I didn't think about that. I may reconsider if I miss that depth reading.
2020 Caymas CX20 Pro, Mercury Pro XS 250 4 stroke, SN 2B735045
Helix 15 msi G4N, Helix 12 msi G3N, Helix 12 mdi G4N, Solix 12 G1
Mega 360, Mega Live w/ Targetlock, 8' Raptors,
Minkota Ultrex 112 w/Ipilot Link, (2) 5 Port Switches
Reply With Quote