Update available still showing up?

[FD209]

Just updated my Carbon, Live, and AT2. Everything seems to be working fine and when you check the software version all show the latest updates but each time I power on the lLive with AT2 the display shows 1 device has a update available. When I click it it shows current version 23.3 available update 23.3. Any ideas?

[John Hagins]

Should only happen 3-4 times then an option to not show it again will display on the screen.

John

[Basshopper]

There were 2 Vesions of 23.3 do you have the latest one that came out in May?

[FD209]

There were 2 Vesions of 23.3 do you have the latest one that came out in May?

Yes, just downloaded Sunday night. It’s the AT2 that is showing an update available. I just noticed I didn’t specify in my original post.

[Got 5]

Mines doing the exact same thing it’s very frustrating it’s also freezing up and showing no source quite often after update

[GOTTA BIG SACK]

All three of Mine show update available also even though it’s got the latest.

[mean_dean]

Are you sure you have the latest, you have to look at the last number, there was a .25 released and shortly after a .26.

23.3-67.3.25
23.3-67.3.26

[Mark O'Neill]

The 23.3-67.3.26 version of Active Target was never released partially because of the timing of the cyber issues with Brunswick, while the versions of the same for the MFD's were released. Only difference pertains to the controlling of the trolling motors, which was fixed on 23.3-67.3.26 and since that did not affect the AT version, not much emphasis was placed on the releasing of 23.3-67.3.26 for AT. Only issue is the 23.3.3.26 version on the MFD's is looking for the same version for AT as that is programed into the version and thus why the messages. I would just ignore at this point as things I assume will be updated shortly and the message will disappear.

[FD209]

Thanks for clarifying. Makes sense.