Hey guys,
I have a 2010 Ranger Trailer dual axle trailer with Dexter Vault hubs. I'd like to order new bearings but i want to try to confirm the part number before ordering.
On the inside of the hubs, i can see UFP 4.071 stamped in them by looking under the trailer.
Can anyone offer any assistance on what part number bearing/seal or kit i would need?
Let me know if there are any other part numbers that might be visible anywhere on the trailer that would help.
Thanks!
Dave
2010 Ranger Z521- 250 SHO
call waymire
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Dexter is very helpful if you can get the info from the axle tag. At least a year or so ago they’d send a complete spec and parts list for your axle as it left the factory.
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
That axle tag is located on the bottom and in the middle of the axle frame. You might have to Jack up the boat on one side to be able to see it. That’s what I did and stuck my cell phone under it to take a picture.
UFP DB-35 3.7k Bearings
Timken Set 4 bearings and races
Timken Set 13 bearing and races
Timken 470460 seal
Vault 1.98” protective cap
UFP 32742 O-ring for behind Vault cap
UFP 33522 wear sleeve
UFP 32736 O-ring for under wear sleeve
1 tube of Vault Hybrid Oil/Grease
PacificTrailers.com has great prices on the UFP parts, Amazon has good prices on the Timken parts.
Reply With Quote
.jpg)