Bow graph mounts

[townsend266]

Looking to add another graph to the bow of my boat, what’s the best ones for the money? Looking at boatlogix
and bass boat technologies but holy cow the prices seem a little insane. Needing a dual mount.

[Slicefixer]

I built my own out of aluminum. It was easy and very cheap. They are rock solid...

I now have stacked carbon 9's. I built the top graphs mount at a height that makes it easy to read/view and adjust.... use it with AT.

142962~2.jpg

Looking to add another graph to the bow of my boat, what’s the best ones for the money? Looking at boatlogix
and bass boat technologies but holy cow the prices seem a little insane. Needing a dual mount.

[townsend266]

I built my own out of aluminum. It was easy and very cheap. They are rock solid...

I now have stacked carbon 9's. I built the top graphs mount at a height that makes it easy to read/view and adjust.... use it with AT.

142962~2.jpg

Thats not a bad idea, I like that. I’ve considered selling the helix 9 already there and just getting a single mount as well to save some money.

[haus9393]

Depends on the boat but bass boat tech across the board gets my vote. Str8up mounts are good as well if that fits your boat setup.

[illinifish]

I used a Stra8up mount when I added a graph for my Livescope

[townsend266]

Depends on the boat but bass boat tech across the board gets my vote. Str8up mounts are good as well if that fits your boat setup.

Skeeter Fxr wanting to mount it to the plate, I’ll check out the str8up thanks!

[Slicefixer]

Thats not a bad idea, I like that. I’ve considered selling the helix 9 already there and just getting a single mount as well to save some money.

It is easy and cheap...😉

The thing I liked was I wanted my AT graph higher so it was easy to switch pages and adjust, so i built it the height i needed. Plus it made the 9" graph usable with FF (bought 2 when Lowrance dumped em @ BP). Any lower and and it was harder to see and interpret.... at least for me.

[townsend266]

It is easy and cheap...

The thing I liked was I wanted my AT graph higher so it was easy to switch pages and adjust, so i built it the height i needed. Plus it made the 9" graph usable with FF (bought 2 when Lowrance dumped em @ BP). Any lower and and it was harder to see and interpret.... at least for me.

Is it hard to see while driving the boat with them that high?

[FishFryKY]

PM sent

[BigfishRanger]

Just updated my bow mounts with the BBT stack. I am very pleased with the outcome. No issues seeing over the bow. Rock solid. They have numerous options to fit your needs.

[Slicefixer]

Is it hard to see while driving the boat with them that high?

Naw, not an issue...... but, I'm only puttering along at 43-44mph....😉

[06 SB]

I searched for the right one looking at cost, weight and adjustability. I bought a Hennessey HOE Dual mount. I am happy with it and would use it again on any boat that it fit.

[dabassking]

I’m very happy with my Str8Up dual mount.

[bass.man65]

I have installed a lot of them and boatlogix is the best there is period. They all work but as far as craftsmanship boatlogix is in a class by it self.

[tonybfishing]

I’m very happy with my Str8Up dual mount.

+1

[basscat tyler]

I’ve got a Str8 Up dual mount on the 6” pedestal for my BassCat. It is Rick solid

[bgibson]

bass boat technologies

[Mackl]

I mounted a Str8up mount to front panel on my Ranger Z520C and it worked great and was by far the cheapest out there from what I saw.

[Vrybusy]

+1 on Str8Up mounts! Great mounts! Met the owner at the launch area during the Classic this year....down to earth, very nice guy!

[fishin couillon]

I found a used HOE dual adjustable mount on here alot cheaper than from the website....works pretty good and adjustable.....do like it but probably like others its gonna be a little more work to take it on/off if you doing work on the bow.....