LiveScope Plus mounting

[Sbp]

Can someone show me a picture of their perspective mounting arm
for the LiveScope plus. I installed mine and the transducer sits in an angle instead of straight with the barrel. Looking at Garmins YouTube install video it looks like the arm should bend back instead of forward like mine. In shallow water, sub 7 foot, the distance will
go to crap and it doesn’t give much information at all. Also it seems that the aim
is left instead of forward (straight) with the trolling motor direction. My LVS 32 was straight ahead. It’s installed on a Garmin trolling motor.

[Erie660]

Can someone show me a picture of their perspective mounting arm
for the LiveScope plus. I installed mine and the transducer sits in an angle instead of straight with the barrel. Looking at Garmins YouTube install video it looks like the arm should bend back instead of forward like mine. In shallow water, sub 7 foot, the distance will
go to crap and it doesn’t give much information at all. Also it seems that the aim
is left instead of forward (straight) with the trolling motor direction. My LVS 32 was straight ahead. It’s installed on a Garmin trolling motor.

I had the new Garmin perspective mount with the Lvs34 and I switched to the Zero degree Fish Obsessed mount. I highly recommend this mount as do a lot of others that have it. Check the videos out on their website.

https://fishobsessed.com/

[fishin couillon]

Here is my install on an Ultrex.....for the most part it will be the same on all trollers.....

[Sbp]

I had the new Garmin perspective mount with the Lvs34 and I switched to the Zero degree Fish Obsessed mount. I highly recommend this mount as do a lot of others that have it. Check the videos out on their website.

https://fishobsessed.com/

I will check it out

[Sbp]

Yep, something has to be up with that perspective arm on mine. The bottom of my transducer is angled to the port side about 10 degrees.

[Jtreed99]

Yep, something has to be up with that perspective arm on mine. The bottom of my transducer is angled to the port side about 10 degrees.

8 degrees of cant on the factory mount is intentional and is present on all Garmin factory mounts made for trolling motors

[Erie660]

A few pictures of the Zero degree Fish Obsessed mount on the Ultrex.

[Sbp]

Thx for those Erie

[Sbp]

8 degrees of cant on the factory mount is intentional and is present on all Garmin factory mounts made for trolling motors

I will
get some pictures of mine once the temps go back up next week.