Thread: Mega 360/ MDI

Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jul 2020
    Location
    Virginia/FLA
    Posts
    970

    Mega 360/ MDI

    I am thinking about changing my current graph setup and adding M 360.

    it is my understanding that with a m360 transducer and a MDI CHO I will have SI capability, but a MDI CHO connected to a SI transducer will not provide SI capability.

    is that correct?

  2. Member
    Join Date
    Jan 2020
    Location
    Oklahoma
    Posts
    1,443
    #2
    you are correct sir! The M360 will provide SI. The M 360 is a rotating SI transducer.
    When SI is selected the M360 will stop rotating and provide a SI signal.

  3. Humminbird Moderator SLYDoggie's Avatar
    Join Date
    Aug 2015
    Location
    Franklin TN & Tims Ford Lake
    Posts
    3,857
    #3
    What BassBum said is correct.

    To answer your other question, you are correct... A regular SI transducer won't add SI capability to a DI unit. The Mega 360 is the only way to get SI on a DI unit.
    ---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
    • Apex 19/16/13, Mega 360, and Mega Live
    • Minn Kota Ulterra Quest Trolling Motor
    • (2) Cannon Optimum Bluetooth Downriggers
    • Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers


  4. Member
    Join Date
    Jul 2020
    Location
    Virginia/FLA
    Posts
    970
    #4
    Thanks

  5. Member
    Join Date
    Jun 2008
    Location
    Whitehall Wisconsin
    Posts
    491
    #5
    For Mega 360 has to be Gen 3 or higher in the Helix line, just a note.