Ranger 375V Fuel Hoses

[darrall]

I want to replace all my fuel hoses on my Ranger 375v. It has dual 12 gallon tanks.
Anyone know how many feet of hose I would need and sizes?
I believe a saw somewhere that it has two different size fuel lines.

Thanks,
Darrall

[paulrodbender]

All 3/8” from tanks to selector switch, to bulb. Then 5/16” from bulb to motor. I have used all 3/8” and never had an issue.

[darrall]

All 3/8” from tanks to selector switch, to bulb. Then 5/16” from bulb to motor. I have used all 3/8” and never had an issue.

Any idea how many feet I need? My boat is at the lake & not at the house where I can measure.

Thanks,
Darrall

[paulrodbender]

I’ll be at my boat later and can give you an approximate of what I have on mine for length. I have a 374 with two tanks in the rear and a selector switch in the slashwell. Is this like your setup?

[darrall]

I’ll be at my boat later and can give you an approximate of what I have on mine for length. I have a 374 with two tanks in the rear and a selector switch in the slashwell. Is this like your setup?

Yes & thank you!

[paulrodbender]

On my setup, it looks like 9’ of black 3/8” fuel hose from both tanks to switch, to bulb and then about 6’ of gray 5/16” from bulb to engine.

[paulrodbender]

Also, my bulb is in the bilge area near the starboard tank.

[darrall]

On my setup, it looks like 9’ of black 3/8” fuel hose from both tanks to switch, to bulb and then about 6’ of gray 5/16” from bulb to engine.

Thanks for the info!

[darrall]

On my setup, it looks like 9’ of black 3/8” fuel hose from both tanks to switch, to bulb and then about 6’ of gray 5/16” from bulb to engine.

I looked at mine this weekend & it looks like it has 3/8" to the switch & 5/16" from the switch to bulb & engine.
I'm not sure if that's what was put on at the factory or if it was changed out at one point.

[paulrodbender]

Not much difference from 5/16" to 3/8" and I'm sure either would work. I'm not 100% sure what mine came with from the factory as I've changed my hoses a few times in the last 30 years. At one point, I did all 3/8" all the way to the engine but now I like the Mercury gray hose in 5/16" from the Mercury bulb to the engine and black 3/8" on the rest.