Troubleshooting (Turn-signal Trim Switch/Bow Trim Switch)

[Warpaint]

I have a 2022 FXR20. Has 7 hours on the boat...went out last weekend on LOZ and the turn-signal trim switch and trim switch at the bow would not operate; however, the trim at the shifter does adjust trim. Before I dig into it this evening I thought I'd elicit some advice from lifelong boat owners on where to start. Didn't know if this would be a fuse matter or a loose connection matter.

**Another point to note, the turn-signal automatic jackplate switch does work**

Thank you in advance.

[Keoweefishing]

It could be either but I suspect a loose connection at the blinker trim. I've not looked for the fuse specific to the trim, but you can easily reset if it is one of those on the panel under the driver console.

[okskeetertzx190]

My zxr was doing this when I bought it and it was the power switch at the console. My last boat only had a switch at the back of the boat so I didn’t think to look for another switch at the console. Might make sure all of the power switches are turned on.