Thread: Hydraulic lines

Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Apr 2013
    Location
    Tunkhannock,Pa
    Posts
    497

    Hydraulic lines

    Am sending a pump out for repairs and neglected to mark which line was the up and down and were they are connected on the pump. Any help on how to identified which one goes wear. Thanks dumfounded.

  2. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,916
    #2
    so the lines themselves if 2.0 are labled on the actual hose Up and down, if you have 1.0 the black is down and the blue is the up. The port closest to the cap is the down, furthest from the cap is the up

  3. Member
    Join Date
    Apr 2013
    Location
    Tunkhannock,Pa
    Posts
    497
    #3
    I dont remember seeing any marks on the hoses I look further when the pump get back. 2.0 poles. Thanks for the info

  4. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,916
    #4
    Quote Originally Posted by jstbass View Post
    I dont remember seeing any marks on the hoses I look further when the pump get back. 2.0 poles. Thanks for the info
    on 2.0 all hoses are marked. Physically printed right on hose