With the TargetLock shaft in its lowest possible depth adjustment ... what is the measurement from the flat mounting plate bracket (that bolts to the Ultrex) to the bottom of the TargetLock shaft ...??
Rickie
With the TargetLock shaft in its lowest possible depth adjustment ... what is the measurement from the flat mounting plate bracket (that bolts to the Ultrex) to the bottom of the TargetLock shaft ...??
Rickie
32"
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Thanks Wayne ...
Rickie
Would I be correct in the idea that -> as long as the MEGA Live xducer is in the water = then it really doesn’t matter which “shaft length” Ultrex TargetLock is mounted to ... ??
Rickie
Last edited by rnvinc; 08-18-2022 at 09:17 AM.
LIVE has to be submerged to work, that's it.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Good info Wayne ...
So it seems that the documented limitation of TargetLock use with an Ultrex 45-52” shaft length is only based on the idea that a user with an Ultrex 60” shaft might have a boat that sits farther out of the water and possibly not allowing MEGA Live xducer to actually be submerged with the maximum 32” TargetLock shaft length ...
Rickie