-
Where is fuse panel on 2015 ZX250 - want to check BOW ACC amp
In looking at bow wiring, I am seeing two sets of wires that are labeled BOW ACC#1 and BOW ACC#2. Look to be 10 - 14 gauge wire.
Under my console I have a block that looks to be reset breakers, I don't see anything that specifies fuse amp size, so I am thinking there is probably another block that may have the actual fuses in it?
Does anyone know where that fuse panel might be located in a 2015 zx250 and if they are blade style fuses, because I want to replace the fuse sizes to 5amp (for Helix 12) and 1amp (for Mega360 transducer).
Are they behind the throttle shifter panel or located somewhere else?
Thanks!!!
-
The block you have located is it. The ACC circuit is 10 amp I believe and to make individual circuits you'll have to add you own fuse block. Many here use Blue Seas with a dedicated wire from the battery.
-
Member
Yep, I removed everything from ACCY wiring and ran dedicated fuses for each unit/module, all off a Sea Clear Power harness. That combined ACCY setup was pretty weak sauce from Skeeter imo. :(.