Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Nov 2020
    Location
    California
    Posts
    307

    Ultrex foot pedal

    2019 Ultrex and temporary switch sticks on, have to tap it a couple times to disengage prop. Also Auto pilot won't engage constant on when depressed. Thinking of taking bottom plate off and cleaning and adding dialectic grease to connections.

    Any suggestions?

  2. Member
    Join Date
    Apr 2019
    Location
    Hamilton, NJ
    Posts
    544
    #2
    There is a reed switch under the momentary
    foot button. It might need adjusting.

    Dielectric grease is an insulator and if you put it on before the connections are made it will actually make contact worse. Put it on after and it will help seal them up a little against corrosion.
    2006 Stratos 294 Pro XL.2005 Yamaha 200 VMAX 3.1L. 8" Hydro Dynamics Rapid Jack. Ultrex 112 I-Plot link. 2 Helix 10 Chirp Mega SI GPS G2N.

  3. Member
    Join Date
    Nov 2020
    Location
    California
    Posts
    307
    #3
    Thanks for the info. I read something about the reed switch, didn't realized what it was and what for.