Page 1 of 2 12 LastLast
Results 1 to 20 of 25
  1. #1
    Member
    Join Date
    Feb 2018
    Location
    Eldorado Kansas
    Posts
    46

    Skeeter Zxr 20 must have

    No more water from low spot under steering wheel wish I would of done sooner. Easy do it your self install great product. Dura-Deck Marine products. Covering the cooler lid sure helps with the junk cooler that Skeeter puts in these boats419E44D0-8B6B-425A-9C1C-AE7425550502.jpeg

  2. Member
    Join Date
    Aug 2013
    Location
    NJ
    Posts
    441
    #2
    Came out great, how much for the kit?

  3. Member
    Join Date
    Nov 2011
    Location
    Cedar Falls, Iowa
    Posts
    9,655
    #3
    That looks sweet

  4. Moderator Mark Perry's Avatar
    Join Date
    Jun 2004
    Location
    Runaway Bay, Texas
    Posts
    82,884
    #4
    Thanks for the heads up. I emailed them through their site late last night after seeing this post as I had been wanting to look into changing out my floor carpet to this. Had an email reply first thing this morning and then a phone call with Russ. They seems like great folks and it was like talking to an old friend. Looking forward to getting it for my boat. Thanks

  5. Member Meadows's Avatar
    Join Date
    Nov 2011
    Location
    Stuarts Draft, VA
    Posts
    5,402
    #5
    That looks sweet!
    2022 Skeeter ZXR20
    Yamaha 250 SHO

  6. Member
    Join Date
    Apr 2011
    Location
    winnfield
    Posts
    5
    #6
    Who do I need to get a hold of for that it’s sweet have a fxr 21 limited 2021 lie to get

  7. Member
    Join Date
    Aug 2016
    Location
    Fort Worth,Tx.
    Posts
    52
    #7
    That is sharp!

  8. Moderator Mark Perry's Avatar
    Join Date
    Jun 2004
    Location
    Runaway Bay, Texas
    Posts
    82,884
    #8
    Quote Originally Posted by outlaw skeeter View Post
    Who do I need to get a hold of for that it’s sweet have a fxr 21 limited 2021 lie to get
    I just emailed through the Duradek site.

  9. Member
    Join Date
    Feb 2018
    Location
    Eldorado Kansas
    Posts
    46
    #9
    They will cut any logos you want that’s just what I had them do. My past boats I’ve always bought those sheets of hydro turf and put in the cockpit, was good but this is a way nicer looking product and is easier to do. I would recommend them took me a while to pull the trigger but I’m glad I did. After deciding what you want cut into the pad is a very quick and simple process.

  10. Member
    Join Date
    Jan 2019
    Location
    Abilene Texas
    Posts
    205
    #10
    thats awesome!

  11. Member
    Join Date
    May 2015
    Location
    West Monroe, La
    Posts
    450
    #11
    That does look super sweet!! But I’m a clean freek and a footprint on that stuff would drive me insane. I don’t like any of that type of material on my Fxr. In the rod boxes, the trailer steps, and on the fenders, so hard to clean

  12. Member
    Join Date
    Apr 2011
    Location
    winnfield
    Posts
    5
    #12
    Thanks

  13. Member
    Join Date
    Jun 2007
    Location
    SE, PA
    Posts
    1,426
    #13
    Looks Great!

  14. Member
    Join Date
    Jul 2007
    Location
    Auburn, Alabama
    Posts
    422
    #14
    Totally changes the look of the cockpit, looks fantastic.

  15. Member 78Staff's Avatar
    Join Date
    Mar 2012
    Location
    Cosmo, FL
    Posts
    4,871
    #15
    Did we ever get a response on cost?

  16. Moderator Mark Perry's Avatar
    Join Date
    Jun 2004
    Location
    Runaway Bay, Texas
    Posts
    82,884
    #16
    Quote Originally Posted by 78Staff View Post
    Did we ever get a response on cost?


    From what I gathered from them is pretty much every order is custom so there probably is a slight difference in pricing based on what you want. I can say that the entire cockpit floor with logo including stepup area with to deck is less than that same piece of OEM replacement carpet.

  17. Member
    Join Date
    Feb 2014
    Location
    Shippensburg, PA
    Posts
    1,092
    #17
    Which color and pattern did you go with? I like the plain gray look

  18. Member
    Join Date
    Mar 2021
    Location
    Mesquite, Texas 75150
    Posts
    200
    #18
    Do they sale a cleaner as well?

  19. Member
    Join Date
    Apr 2007
    Location
    Pontotoc, MS
    Posts
    6,522
    #19
    How did you get them the precise measurements? That looks awesome!!
    2022 Skeeter ZXR 21

  20. Member
    Join Date
    Jan 2019
    Location
    Abilene Texas
    Posts
    205
    #20
    can we get an approximate cost???

Page 1 of 2 12 LastLast