'99 EFI 200 gauge recommendations

[SONNN]

Hello.

0G824976

Looking for recommendations for new gauges for my '99 200 EFI. Thinking just go with Quicksilver analogs, just not really sure if they would all work or if its a specific gauge model? Redoing my 2000 BCB P3 that had a BP101 dash panel.

Thanks.

Dan

[leonreno]

If it’s smartcraft compatible I would go that route.

[TMANN]

99's not Smartcraft. Regular Mercury analogs are the only option I know of.

[SONNN]

Smarties started in 2000, one year off for me (of course).

Yeah just analogs, which I am fine with. What I am not sure of is if other brands like SeaStar and such are compatible, or how to tell.

[leonreno]

Most are compatible of analog, which gauges are you going to use?

[SONNN]

Most are compatible of analog, which gauges are you going to use?

Just these ones here:

Oil Pressure
Water Temp
Water pressure
Tilt/trim

[leonreno]

There will be no oil pressure on a 2 stroke. Yltilt/trim may require a specific gauge but the water temp and water pressure will not. I would get a 0-30psi gauge for water pressure and a temp gauge up to 220, maybe 250, though if over 200 it’s usually a problem.

[SONNN]

There will be no oil pressure on a 2 stroke. Yltilt/trim may require a specific gauge but the water temp and water pressure will not. I would get a 0-30psi gauge for water pressure and a temp gauge up to 220, maybe 250, though if over 200 it’s usually a problem.

Many appreciations, sir.

[JOE54]

There will be no oil pressure on a 2 stroke. Yltilt/trim may require a specific gauge but the water temp and water pressure will not. I would get a 0-30psi gauge for water pressure and a temp gauge up to 220, maybe 250, though if over 200 it’s usually a problem.

+1 MERC has some very nice analog gages

[SONNN]

Ended up calling Mercury directly and they said Admiral or Flagship. Ended up buying the Admiral lineup. I will post if there is any issues just in case someone else needs this info in the future