Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2008
    Location
    Rutland, MA
    Posts
    781

    1999 Outboard 225 J225HPLEEN Tach

    Tach isn't working, stator is good, charging with no issues. I get power to the purple wire and about 4V to the gray wire. Tach is wired correctly and is a known good tach.
    Is the regulator/rectifier bad?

    Thanks

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,276
    #2
    VRO still connected? If so disconnect the harness at the pump and see if tach returns.

  3. Member
    Join Date
    Mar 2008
    Location
    Rutland, MA
    Posts
    781
    #3
    VRO is gone. If there's a harness, I'm not sure where it's located, shop did the work.

  4. HYDRA SPORT LS205 225HO JER-1 BIG BASS's Avatar
    Join Date
    Mar 2011
    Location
    Proctorville Ohio
    Posts
    3,517
    #4
    Is the tack set to correct setting, I forget exactly what it needs be on 6 or something, just don’t remember.
    I have same exact motor, 1999 J225HPLEEN HO

  5. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,276
    #5
    Yes it is 6. Give the pole select switch a few turns back and for and back to 6. May have some corrosion on the internals.