-
Ditwiller Jack plate not working
Anyone have an experience with a Jack plate not working.Boat was not used much for 1.5 years.Trim and tilt works great .Jack plate went up very slow and now won’t come down.When zi use the blinker switch ,I can hear clicking sound.Any ideas?Thanks
-
BBC SPONSOR
Have you checked the plate for lubrication as it sounds like the relay is operating. If so then it could be the motor.
-
The way the zeros are positioned,I can’t get any greese to them.
-
-
Low on hydraulic fluid.....
-
I had the same problem with mine. Need to grease it. At least try that before you start tearing things a part.
Roger Jenks Jr
2021 Bass Cat Lynx
250 Pro xs 4S Serial # 3B010758
-
Mine did the same thing and was low on fluid