Took a comp prop 22 pitch 4 blade and cut 1/2 the blades off and tapered leading edge about 45 degrees. Loads up nicely to about 5200 rpm on a trailer. Doesn't stress the transom or stress the hold downs either. I use this on crossflow V-6's.
Took a comp prop 22 pitch 4 blade and cut 1/2 the blades off and tapered leading edge about 45 degrees. Loads up nicely to about 5200 rpm on a trailer. Doesn't stress the transom or stress the hold downs either. I use this on crossflow V-6's.
Last edited by omcforever; 07-26-2022 at 08:57 AM.
Age and treachery will always overcome youth and skill !!
Pix or it didn't happen.
Age and treachery will always overcome youth and skill !!
Reply With Quote
