Motor mount position on Atlas jackplate

[802spinnerbait]

Looking for picture on the exact motor hole mount position being used on v8 4stroke merc/Atlas jackplate, obviously there is different variants for up and down. I run a 2021 721 Proxp. Lost speed since mounting atlas and switching to lithium. I know lithiums will def slow you down some but curious on bolt position folks have on their Atlas and the 4stroke v8 merc.

Out of the 5 mount positions I am using the middle one.

[802spinnerbait]

Wow, nobody has a picture?

[haus9393]

Sorry bub no one runs an atlas. We all know bobs is best!!!!!!

[Bartman]

Here's where mine is at on a 2019 920 Pro XP with Atlas 10" and running all lithiums. She runs 77mph empty and 75 fully loaded with two 220 lb guys. Best speed is with Atlas gauge on 11 or 12

IMG_0650.JPG

[802spinnerbait]

Awesome, kinda what I expected. Lower in the water it looks like and appears you used to be set in the middle like I have currently setup looking at the old bolt mark. Thanks Bartrman!

Here's where mine is at on a 2019 920 Pro XP with Atlas 10" and running all lithiums. She runs 77mph empty and 75 fully loaded with two 220 lb guys. Best speed is with Atlas gauge on 11 or 12

IMG_0650.JPG

[802spinnerbait]

Dangit Haus!!!

Sorry bub no one runs an atlas. We all know bobs is best!!!!!!

[Bartman]

it looks like and appears you used to be set in the middle

I noticed that too in the picture but it wasn't. It was set from the dealer like that from day one.. I forgot to mention, I also have dual 8' power poles.

[802spinnerbait]

Awesome, thanks. I do as well.