Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Sep 2013
    Location
    St. Charles, MO
    Posts
    162

    Ladder Recommendations

    Hi,

    I have A 1999 Ranger Cherokee 237. It's all aluminum Vee-bottom. Any suggestions for the best transom mounted ladder for this boat?

    Thanks,
    reccrew

  2. Member
    Join Date
    Oct 2012
    Location
    Pelham, AL
    Posts
    2,154
    #2
    Have used a Twist Step since they came out. Mounts to motor mount screws and works flawlessly with no worries about flopping down.
    2015 Ranger RT188 DC; BassCat Storage Box; Mercury Optimax 115ProXS;
    19" Spitfire X7; Vessel View Mobile; Minn Kota Ultrex 80; GForce Handle;
    TM Eliminator; Helix 7 G2N SI Combo F/R; HydroWave KVD; BBT 4" Angled Bow Mount; Durasafe Locks for Electronics and Ultrex;
    Twist Step Boarding Ladder; EZEE Step ES1; BAC RAC Rod Storage; Motor Mate Transom Saver

  3. Member tcesni's Avatar
    Join Date
    Apr 2005
    Location
    Smith Mountain Lake, VA and a cottage in Ontario
    Posts
    11,613
    #3
    Quote Originally Posted by GeauxTide View Post
    Have used a Twist Step since they came out. Mounts to motor mount screws and works flawlessly with no worries about flopping down.
    Is yours mounted on a jack plate ?
    2018 Ranger RT188 SC Black/115 hp Yamaha SHO 4-stroke; Garmin LVS34 - north
    2018 Ranger RT188 DC Black/115 hp Merc Pro XS 4-stroke; Garmin LVS34 - south
    14' Mirrorcraft tin boat (ancient) with a 9.9 Mercury 4-stroke, no electronics; catches fish anyway

  4. Member
    Join Date
    Sep 2013
    Location
    St. Charles, MO
    Posts
    162
    #4
    Thanks,
    I had an E-ladder on Triton with a jack plate it was a bear to get into the boat. This Ranger doesn't have a jack plate and I was thinking of a bolt thru fold=up type but wanted something of good quality and not familiar with any products?

  5. Member
    Join Date
    Apr 2022
    Location
    Cape Cod, MA
    Posts
    466
    #5
    Not sure about these, but removable is nice. Stows in clips or in a hatch.

  6. Member
    Join Date
    Aug 2017
    Location
    Kalamazoo, MI
    Posts
    368
    #6
    Try looking at the various Garlick boarding ladders. Put one on my Alumicraft, worked great.

  7. Member
    Join Date
    Sep 2013
    Location
    St. Charles, MO
    Posts
    162
    #7
    Thanks for the suggestion, I am going with a Garlick as I found one that will work on by transom.

  8. Member
    Join Date
    Sep 2013
    Location
    St. Charles, MO
    Posts
    162
    #8

    Please Delete Thread

    Please Delee.