I've about had it with Minn Kota... After getting my 36V I-Pilot/link TM out of the shop last week, I'm once again stuck with a motor that does not work!! last issue was random lights turning on and off on their own (spot lock, nav, & prop) When this would happen I'd loose steering and prop would stop. turn the unit off then back on and I'd be good to go for another min or two.. A new mother board, steering sensor, and armature.. And it was good to go. Till today, while on the water it suddenly felt like I was hitting bottom with the prop, (impossible as I was in 25' of clear water) After a second or two it suddenly stopped spinning. All other features have power, steering included. I tried my remote and it steers fine just does not move the prop even though it shows it was spinning.. Shear pin is fine.. Any ideas before I throw this thing on the dump and buy another manufacturers unit... It was purchased less then a year ago and is still under warranty... Sorry for the rant, just a bit frustrated for the money we pay..