Can anyone recommend where I could get a replacement or how I can replace what I have. It is falling apart and looks terrible. Thanks
Can anyone recommend where I could get a replacement or how I can replace what I have. It is falling apart and looks terrible. Thanks
What does it look like? I have an extra for an 06 TRX. Don't think it's the same?
Last edited by 6BOOMER; 06-24-2022 at 04:04 PM.
Ashmore marine products.
Lightning 6
2007 TR-196DC
Thanks, I tried there with no luck. Precision Sonar will rebuild me one (but I have to send my existing one in).
Is it the same as an 07? I'm working on redoing mine now with aluminum for new switches plus graph.
Do you need a new panel, new shroud, or both?
You could strip the vinyl off your bow shroud & mold a new one with kidex. It is fairly easy to work with. Lots of Youtube videos of fabricating holsters & sheaths…..just don’t get heat source too close.
You can fabricate a replacement panel from 1/8” aluminum or 1/4-3/8” hdpe (starboard, or cutting board). All 3 are very easy to fabricate with (scrolling Sabre saw, drill, palm sander, trim/ circular saw with metal cutting blade).
C&o might have a replacement bow shroud and/ or panel for your hp.
Lightning 6
2007 TR-196DC