i've got baitcast reels that when i reel in a fish the handle moves without moving the spool. Obviously when i crank down the drag it fixes the issue but i dont want the drag to be so dang tight. What am i missing with this?
i've got baitcast reels that when i reel in a fish the handle moves without moving the spool. Obviously when i crank down the drag it fixes the issue but i dont want the drag to be so dang tight. What am i missing with this?
If you can’t find a happy medium between no drag and max drag, it’s possible the drag washers are worn out and need to be replaced.
Agree with the above. If the handle is moving without the spool moving, that's the drag slipping. The only way to stop the drag slipping is to tighten it. If you don't want it that tight (because you want it to slip a bit during a hookset, I'm guessing?) then you've either got to live with it while cranking in a fish, or work on tightening the drag after hooking the fish. Otherwise, as dabassking mentions, your drag washers may be toast.
2011 Skeeter ZX225
225 Yamaha HPDI Series 2
Minn Kota Ultrex 112 52"
Console: HDS 16 Carbon
Bow: HDS 12 Carbon, Solix 12 G2, Mega 360, Garmin 106 SV, LVS 34
Thanks for your responses but these are brand new reels. So its the drag setting though....thank you