97 201 with a 225 Etec. What prop?

[rdw]

looking for prop suggestions from people running a 225 Etec on a 201.

[mactlman]

what year etec? i would try a 24p bravo1 fs which worked great on my stratos. for speed a 24 or 25p fury 3 with a Michigan WHEEL KIT #200 looking for holeshot and handling or top end speed or????? have poles or talons? JACK PLATE? FIXED OR HYDRAULIC??

did you ask same in the prop area and set up area above? mike lohn will know or call marks propellers and he will know also both are the best at prop choice from what I have seen and experienced talking to both


SET PTP TO 3.25 OR SO

[rdw]

what year etec? i would try a 24p bravo1 fs which worked great on my stratos. for speed a 24 or 25p fury 3 with a Michigan WHEEL KIT #200 looking for holeshot and handling or top end speed or????? have poles or talons? JACK PLATE? FIXED OR HYDRAULIC??

did you ask same in the prop area and set up area above? mike lohn will know or call marks propellers and he will know also both are the best at prop choice from what I have seen and experienced talking to both


SET PTP TO 3.25 OR SO

2008 etec, I didn't ask in the prop section cuz I figured this page would be full of people with the exact same boat motor, and definitely looking for a four-blade for what I'm looking for, was thinking maybe a trophy Plus

[rdw]

what year etec? i would try a 24p bravo1 fs which worked great on my stratos. for speed a 24 or 25p fury 3 with a Michigan WHEEL KIT #200 looking for holeshot and handling or top end speed or????? have poles or talons? JACK PLATE? FIXED OR HYDRAULIC??

did you ask same in the prop area and set up area above? mike lohn will know or call marks propellers and he will know also both are the best at prop choice from what I have seen and experienced talking to both


SET PTP TO 3.25 OR SO

P2P is 3.5 with a 6 in manual Jack plate

[mactlman]

the guys hanging out on the prop and set up boards know what to do and what to recommended as will guys on here also

[MoStratos]

I previously owned a ‘97 Stratos 201 and ran a 225 Etec with a 4 blade 25p Renegade. I had a 6” HiJacker manual jackplate. This setup worked very good for me. 3.5 p2p. Usually 70 mph top speed with pretty good hole shot.

[rdw]

I previously owned a ‘97 Stratos 201 and ran a 225 Etec with a 4 blade 25p Renegade. I had a 6” HiJacker manual jackplate. This setup worked very good for me. 3.5 p2p. Usually 70 mph top speed with pretty good hole shot.

tks for the info, I just got a 25 trophy plus, hoping to try this weekend.