Have a HDS8 Gen2 at the bow and a HDS9 Gen2 at the console that are networked together using an Ethernet cable. There is a Navionics chip in the HDS9 console and I select the Navionics for Chart on the HDS8 at the bow however it will not bring it up.
I checked the network at the HDS8 on the bow and it sees the HDS9 on the console. Can’t figure out what I’m doing wrong. Is it a setting out do I have an equipment issue?
Any help would be appreciated.
Not sure if it matters but units are in a 2012 Ranger Z521.