I want to move this seat an inch or so forward for net storage. When I ordered the boat, the adjustable seat was to be on the passenger side for this reason. Not sure what sort of fasteners were used and if there would be an issue just removing them and swapping out or would I somehow need access to the underside? Anyone ever done this?
2021 Vexus 1880 Ghost TM and 12” Carbons
Should be an easy swap. The bottom seat cushion lifts up from the rear giving you access to the mounting hardware. The fuel tank sits right under the seats so be careful if your drilling new holes.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
I think there may be more to it....
Not really.Originally Posted by Foxtrot
4 Nuts to remove the drivers seat, Then a few screws holding the adjustable slide in place. Passenger seat has 4 screws holding it in place. Depending on someone’s skill set, 30 minutes to a hour max.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
If they built the boat not to your spec get your dealer involved and have vexus send you the adjustable seat bracket that way both seats are adjustable now
Reply With Quote