Been looking for bulletin 02007-011. My motor has updated 60v03 pump on it.
Service manual says 1mm for 250.
I think bulletin 02007-011 has a different spec, but cannot find it.
Best my dealer comes up with from Yamaha Canada is this 2005 tech tip.
Which is correct?
04 Triton TR21X, 23 SHO NIZPRO'd!!!
27p Croxton Razor 4
old rigs
95 BassCat Pantera II, 200 XRi Merc
97 Skeeter ZX185c
97 ProV150--KOTTMANIZED! 27M
The Yam Can tech tip is consistent with the Yam US bulletin.
What is the date on that one?
04 Triton TR21X, 23 SHO NIZPRO'd!!!
27p Croxton Razor 4
old rigs
95 BassCat Pantera II, 200 XRi Merc
97 Skeeter ZX185c
97 ProV150--KOTTMANIZED! 27M
7/26/2007.
This is great. LOL. MUCH leaner than I have been running. Service manual says 1mm....I am at 1.35mm. I will adjust to about 0.75mm....
thx
04 Triton TR21X, 23 SHO NIZPRO'd!!!
27p Croxton Razor 4
old rigs
95 BassCat Pantera II, 200 XRi Merc
97 Skeeter ZX185c
97 ProV150--KOTTMANIZED! 27M
Why are you going to 0.75mm when the bulletin says less than 0.5mm. Is math different in Canada?
just staying on the safe side. Runs great as it is right now, plugs are clean.
04 Triton TR21X, 23 SHO NIZPRO'd!!!
27p Croxton Razor 4
old rigs
95 BassCat Pantera II, 200 XRi Merc
97 Skeeter ZX185c
97 ProV150--KOTTMANIZED! 27M
Ok, under 0.5mm. Done.Originally Posted by yam911
04 Triton TR21X, 23 SHO NIZPRO'd!!!
27p Croxton Razor 4
old rigs
95 BassCat Pantera II, 200 XRi Merc
97 Skeeter ZX185c
97 ProV150--KOTTMANIZED! 27M
Reply With Quote