Parting out a 2006 20i

[haftafish22]

Hey guys I’m parting my dads boat that had significant hull damage after trailer broke in half and sent the boat off in the ditch. Everything but the hull is still good so if your looking for control pads, pumps, lids, or any skeeter specific to this model let me know.

i believe I have responded to most everyone. If you did not send a contact to send pics to, please do. If you are second in line I have not reached out yet but will after first in line responds.

ok guys gonna make a small list here of some items remaining

Tie off cleats 2
front bow panel (homemade)
all lids and hinges
any of the plastic compartment boxes below deck
steering wheel
hot foot
hds 5 and in hull ducer
lots of blue connector lowrance wiring
lowrance gps puck
interior trim pieces
dms breaker box/head
water pressure gauge
lowrance yellow ethernet
battery trays
aluminum bridging plates in bilge area
lowrance 3d transducer
lowrance remote temp sensor
feel free to ask if not listed!!!!

[jay74]

PM sent.

[MichAngler]

PM Sent

[zman5]

Pm sent

[haftafish22]

All pm’s replied to. Unfortunately, the damn wrecker hasn’t delivered yet, but as soon as they drop it off I will follow up with pics and prices for all

[BorderBass]

I sent you a PM yesterday.

[thayes15]

PM Sent

[haftafish22]

Responses, and an update, insurance has not released the dang boat. I will update everyone when I receive and get pictures out. I apologize as everything was supposed to be delivered this week

[84rickygreen]

Waiting!

[haftafish22]

Waiting!

you and me both!!!! I spoke with insurance and they have cut the check to the wrecker service. Wrecker service says when they receive check they will get it to me asap. I promise I will send all pics and update everyone upon its return. I apologize, insurance was playing games and this has got me just as pissed as you I’m sure. Have a good evening.

[haftafish22]

Ok so last update, insurance is going to cut check to me and I will pay tow truck driver for delivery and storage. Getting closer!!! Apparently the podunk tow truck company needed to fill out a w9? And didn’t have a fax??? I dunno but hopefully resolve and I can get this boat here and start pulling it apart, getting photos, and most importantly getting back to all the inquiries. Thank you for hanging patient with me

[84rickygreen]

Will you buy another Skeeter? I love my 20i. Would like to have a newer boat but gosh darn the values are so high!! Mine fishes just fine! If anything I will upgrade the HPDI to a new SHO

[haftafish22]

Will you buy another Skeeter? I love my 20i. Would like to have a newer boat but gosh darn the values are so high!! Mine fishes just fine! If anything I will upgrade the HPDI to a new SHO

this was dads boat I have my same skeeter. He purchased an 2021 21fxr select. It is a very very nice rig, and rides pretty damn well. I don’t think there is a skeeter produced now or in the past that is a better riding boat than that I class. Rip 20I

ps, he upgrade to a sho in 2016 and that boat was an awesome combo. That hpdi was junk and blew two separate times

[84rickygreen]

this was dads boat I have my same skeeter. He purchased an 2021 21fxr select. It is a very very nice rig, and rides pretty damn well. I don’t think there is a skeeter produced now or in the past that is a better riding boat than that I class. Rip 20I

ps, he upgrade to a sho in 2016 and that boat was an awesome combo. That hpdi was junk and blew two separate times

O problems (knock on wood) with my current motor. I do the maintenance and change out all of the filters fairly regularly. Depends on how hard I fish during the year. I just want the quiet 4 stroke motor and not deal with oil injection.

[haftafish22]

Whoohoooo!!!! Boat is to be delivered tomorrow. I’ll get picks and pricing out asap. Let me know if there’s anything you need and I’ll get you an answer.

josh

[haftafish22]

See first post for additional request. If you have not heard from me, you will when first in line has responded.

[jhcombs1]

Interested in your control pads or digital switches on the dash. May be interested in other items, so get a hold of me please. Call or text me with info Jim 815-979-2409

[haftafish22]

Interested in your control pads or digital switches on the dash. May be interested in other items, so get a hold of me please. Call or text me with info Jim 815-979-2409

no longer available

[haftafish22]

Updates

[Bruin bass]

Seats?