Results 1 to 17 of 17
  1. #1
    Member
    Join Date
    May 2012
    Location
    Clarksville, TN
    Posts
    193

    What is this called and where can I find some?

    2010 520VX. This is the second time I will be replacing these rectangular "washers" that the snap ring and it's washer slides on. Poor design in my opinion. I think I found them on Ebay last time. But, I am not able to recall what I typed in for the search. If there is a better product out there, please let me know.
    Attached Images Attached Images

  2. Member
    Join Date
    Feb 2007
    Location
    Collinsville, IL
    Posts
    7,197
    #2
    That’s a UFP A-60 Actuator. Go to Trailer Parts Superstore and they will have everything you need..

  3. mikesxpress
    Guest
    #3
    David I see no signs of lubricant on the picture? That pin assembly and the top of the actuator needs to stay lubed up to reduce wear and dampen sound. I utilize spray can white grease with the tube inserted to get the grease deep inside the actuator and wipe off the excess.

  4. Member bloodman's Avatar
    Join Date
    Oct 2008
    Location
    Belvidere, Il
    Posts
    6,000
    #4
    Quote Originally Posted by mikesxpress View Post
    David I see no signs of lubricant on the picture? That pin assembly and the top of the actuator needs to stay lubed up to reduce wear and dampen sound. I utilize spray can white grease with the tube inserted to get the grease deep inside the actuator and wipe off the excess.
    Thanks for reminding me to do mine!

  5. Member
    Join Date
    May 2012
    Location
    Clarksville, TN
    Posts
    193
    #5
    Thank you.

  6. Member
    Join Date
    May 2012
    Location
    Clarksville, TN
    Posts
    193
    #6
    Not available through this vendor. Must be a Ranger "thingamabob". I will try to send parts a picture. Thank you.

  7. Member Rangerdic's Avatar
    Join Date
    Feb 2014
    Location
    Gurnee, IL
    Posts
    458
    #7
    I'm pretty sure that is a Ranger item, I purchased a few of them about 8 years.
    Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
    At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by
    European Marine)

  8. Member
    Join Date
    May 2012
    Location
    Clarksville, TN
    Posts
    193
    #8
    Quote Originally Posted by Rangerdic View Post
    I'm pretty sure that is a Ranger item, I purchased a few of them about 8 years.
    Do you recall what it is called?

  9. Member
    Join Date
    Jun 2011
    Location
    Birmingham, AL
    Posts
    1,801
    Joey Aderhold

  10. Member Rangerdic's Avatar
    Join Date
    Feb 2014
    Location
    Gurnee, IL
    Posts
    458
    #10
    Sorry for the delay, I do not remember what that is called, I'm sure if you described it (or a pic) that should help.
    Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
    At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by
    European Marine)

  11. Great Lakes Captain RangerTim619's Avatar
    Join Date
    Aug 2004
    Location
    Swanton, OH
    Posts
    1,120
    #11
    Are you wanting the external snap ring?
    Ranger 619 * Honda 200* Minn Kota* Humminbird *Garmin
    Fenwick *Abu Garcia

  12. Member bloodman's Avatar
    Join Date
    Oct 2008
    Location
    Belvidere, Il
    Posts
    6,000
    #12
    Why is this even needed. My 2018 doesn't have this and neither did my 2014?

  13. Member
    Join Date
    May 2012
    Location
    Clarksville, TN
    Posts
    193
    #13
    Quote Originally Posted by RangerTim619 View Post
    Are you wanting the external snap ring?
    No. I need the rectangular aluminum "washer " that the snap ring and its washer slides on.

  14. Member Rangerdic's Avatar
    Join Date
    Feb 2014
    Location
    Gurnee, IL
    Posts
    458
    #14
    Quote Originally Posted by crock1576 View Post
    Do you recall what it is called?
    Ok, I found an oid invoice, please see pic's for info.IMG_1482.jpgIMG_1483.jpg
    Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
    At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by
    European Marine)

  15. Member
    Join Date
    May 2012
    Location
    Clarksville, TN
    Posts
    193
    #15
    Quote Originally Posted by Rangerdic View Post
    Ok, I found an oid invoice, please see pic's for info.IMG_1482.jpgIMG_1483.jpg
    Awesome. Now we are cooking with grease. Thank you taking the time.

  16. tracer1 tracer1's Avatar
    Join Date
    Jun 2013
    Location
    Aiken, SC
    Posts
    2,393
    #16
    I have never had or seen one of those.

  17. Member Rangerdic's Avatar
    Join Date
    Feb 2014
    Location
    Gurnee, IL
    Posts
    458
    #17
    Spoke with Ranger parts department today on ordering a couple more Slot Protectors before they become obsolete, bummer too late. They are use to protect the Road Armor from delaminating from the trailer. The replacement part is called "Front Roller Pin Washer P/N 209319 $0.92 EACH". Ranger changed the style around 2012 maybe 2013. I ordered a couple of the new style just so I have them in stock.

    I will say, outstanding service from the Ranger Parts Department took in about 20 minutes to identify the change out.
    Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
    At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by
    European Marine)