Not sure exactly where it came from. I didn't see any missing anywhere. could have been one they dropped during assembly. anyone have any idea?
it's an 8mm head
IMG-2312.jpgIMG-2312.jpg
Not sure exactly where it came from. I didn't see any missing anywhere. could have been one they dropped during assembly. anyone have any idea?
it's an 8mm head
IMG-2312.jpgIMG-2312.jpg
Last edited by VA Bass; 06-06-2022 at 09:22 PM.
2021/ 200 hp 4 stroke pro xs
2021 Triton TRX 18
#3B051045
Thats a common size used in multiple places. Hopefully it was dropped during assembly.
Looks like it has been used honestly. Maybe they dropped it after the first service last year and just put a new one in it's place. I will run it up to the dealer and see if they can tell me.
2021/ 200 hp 4 stroke pro xs
2021 Triton TRX 18
#3B051045
Any repairs been done (other than the recent service)?
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
No sir. Service was done last July and the motor has not been touched since then, I took it by the dealer today, the tech came out and looked at the screw/bolt, looked at me and said "there is a bunch of those in that engine"...."but I will go look really quick with my light." we both looked around, and found nothing missing from out view point. He said it was likely dropped during assembly or service and they just put another in its place. Told me not to worry too much about it. So I said ok and went fishing.. not much else I can do. I wouldn't expect them to stop what they are doing and tear the engine down to find a the mystery whole or maybe no mystery at all. He just told me to hold on to it just in case.
2021/ 200 hp 4 stroke pro xs
2021 Triton TRX 18
#3B051045
More than likely they are correct. I've even seen a couple recently where the "spare bolt" wasn't even a type used on Mercury engines.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
really? that's strange. but I guess these things can happen in a shop with so many different motors.
2021/ 200 hp 4 stroke pro xs
2021 Triton TRX 18
#3B051045
I think that bolt matches exactly gif the small cradle where your fuel line and cables enter the front of the lower cowel
2018 TRX 18. 2020 Mercury 200 Pro XS V8
it looks like the bolts on the side of the engine that holds the plastic housing on. I think it's 4 bolts top to bottom. I will check where you arfe talking about.
2021/ 200 hp 4 stroke pro xs
2021 Triton TRX 18
#3B051045
Look inside of the cowl and see if any part of the cowl assembly is bolted on with that bolt. My cowl was missing a similar bolt and causing a rattle at speed. Not the same engine but you never know.
I found the same bolt under my cowling is it 26 mm long x 6mm. I have a 2020 200hp 4 stroke pro xs
hum, who knows. I did what I could. I took it to a certified merc dealer and mater tech, he told me not worryabout it. Nothing else I can do myself. I am certainly not going to take things apart. I looked and he looked and could find no missing bolts.
2021/ 200 hp 4 stroke pro xs
2021 Triton TRX 18
#3B051045