Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Mar 2009
    Location
    Plainfield, IL
    Posts
    766

    Micro Anchor Power Cord Connection?

    Hi All,

    Had my micro anchor for several years now. To be honest, I only actually use it about a dozen times a season being that I'm primarily fishing deeper water. Nonetheless, I went to plug it in yesterday, and there was no power. Eventually figured out that if I pushed and applied a twisting motion on the power connection to the motor, it would work fine. Tried to clean the terminals to no avail as the same issue continues to present. I went ahead and ordered a new power cord hoping that it's a $40 fix instead of a $600 fix. Being that it's clearly a connection problem, are there any recommendations on how to approach this? Thanks in advance.

  2. Member
    Join Date
    Mar 2009
    Location
    Plainfield, IL
    Posts
    766
    #2
    For anyone who has a similar problem, if you dig enough on youtube there is a video that demonstrates the problem I had. The internal motherboard simply lost connection to the terminals. It's as simple as carefully pressing the board to engage the terminals. Very easy fix.