2007 Pro 201
My port livewell remote was sticking, it eventually snapped at console. I had to lay on my stomach and reach down into the bilge to open/close the livewell valve with pliers during my last tournament. I started to tear into my bilge the other night in an attempt to clean or replace that port valve, but it's anchored to the hull. It looks like it may just be a retaining clip of some kind, but it was already late and I figured I'd post on here and do some research to better diagnose the issue before I started ripping and tearing. Has anyone tore out their factory installed livewell system that could offer advice?