Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jun 2013
    Location
    louisiana
    Posts
    167

    suzuki on a coral

    thinking about putting a suzuki on my coral a 225,will a 25 inch shaft work?the measument i got was 24 inches roughly from the top of transom to the bottom by the drain plug.

  2. Member
    Join Date
    Jun 2013
    Location
    louisiana
    Posts
    167
    #2
    maybe i should rephrase my question what lenght shaft is recommended for a coral,iv got a 200 efi and when i looked the serial number up there were two different shafts but no mention of length.

  3. Member Tx 201's Avatar
    Join Date
    Aug 2004
    Location
    Abilene, Texas
    Posts
    3,001
    #3
    Pretty sure for Cobras and Corals they were 20 inch shafts, the mounting bracket allows for the motor to be mounted lower, I think mine was in the second hole down. I suppose if you got a 25 inch shaft you might mount it in the lower holes, depends on the jackplate. Back quarter view.jpg

  4. Member
    Join Date
    Jun 2013
    Location
    louisiana
    Posts
    167
    #4
    thanks

  5. Member
    Join Date
    May 2009
    Location
    Roseville, CA
    Posts
    25
    #5
    Yes. 20 inch shaft. I repowered my with a 250 SS 4 years ago and absolutely love it! IMG_20180925_170235_Bokeh.jpg