I've got my Point One mounted at the bow and am about ready to install a new Ghost Trolling Motor. Is it okay to mount the TMC-1 and Point One next to each other? Thank you in advance for any information.
I've got my Point One mounted at the bow and am about ready to install a new Ghost Trolling Motor. Is it okay to mount the TMC-1 and Point One next to each other? Thank you in advance for any information.
I would move the POINT ONE to the rear of the boat as close to your Side Imaging Xdcr as possible.
I agree with limit5. Do a search and you will find many posts on why the Point 1 should be mounted at the stern. Most convenient place to mount the TMC-1 is under the Ghost arm. It’s out of the way and can’t get stepped on. But, to answer your question, they will not interfere with each other unless you mount one on top of the other.
NoCAL
2004TR-21X/2015 250 ProXS
2B112175
Strongly agree with the above posts!
ciao,
Marc
Thank you all for the response. I plan on moving the Point One but want to get the Ghost calibrated. Thanks again limit, NoCAL and Marc.