Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Apr 2012
    Location
    Collinsville, IL
    Posts
    7

    Ultrex wiring question

    My wiring pulled out from the top of my Ultrex. How do you get this piece back in place?
    Attached Images Attached Images

  2. Member
    Join Date
    Dec 2013
    Location
    Spring Hope,NC
    Posts
    7,253
    #2
    Lift out the little band aid shaped cover using the tab on the end of it.Then there is some screws to disassemble that bracket. Once the top cover is off the grommet will fit back in to place.Exit. BTW,that comes from lifting the motor up all the way with the cable,the cable pulls against the grommet and pops it out. Unlock the motor with the cable and then lift the head with your other hand. That is a design flaw,IMO.

  3. Member
    Join Date
    Apr 2012
    Location
    Collinsville, IL
    Posts
    7
    #3