Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    Apr 2022
    Location
    Lafayette, La.
    Posts
    133

    Best All Around Prop for '03 Optimax 135???

    ANY suggestions on the best prop for optimum rpms and speed at WOT? 2003 Opti 135 on a 2003 18' Xpress H56 (0T795533). Currently have a no name brand - stainless - 4 blade - 19P & 6" manual pro hi-jacker jack plate.
    2003 18' Xpress H56, 2022 Tohatsu MFS140 / Serial #071184BB

  2. Member 06 SB's Avatar
    Join Date
    Feb 2012
    Location
    West Point Lake, GA
    Posts
    11,007
    #2
    The 135 is an unusual animal since it has a 2.0 gear case vice the typical gear ratios of 150s. What is you WOT with the 19” prop? Any chance you can post a picture of the prop?

    USN Retired
    2020 Basscat Caracal
    2020 Mercury 225 ProXS 4s



  3. Member
    Join Date
    Apr 2022
    Location
    Lafayette, La.
    Posts
    133
    2003 18' Xpress H56, 2022 Tohatsu MFS140 / Serial #071184BB

  4. Member
    Join Date
    Apr 2022
    Location
    Lafayette, La.
    Posts
    133
    2003 18' Xpress H56, 2022 Tohatsu MFS140 / Serial #071184BB

  5. Member
    Join Date
    Apr 2022
    Location
    Lafayette, La.
    Posts
    133
    2003 18' Xpress H56, 2022 Tohatsu MFS140 / Serial #071184BB

  6. Member
    Join Date
    Apr 2022
    Location
    Lafayette, La.
    Posts
    133
    #6
    Quote Originally Posted by 06 SB View Post
    The 135 is an unusual animal since it has a 2.0 gear case vice the typical gear ratios of 150s. What is you WOT with the 19” prop? Any chance you can post a picture of the prop?
    Did the best I could with pics of it. My WOT now is 40-42 mph and 4950-5000 rpm’s before the porpoising starts.
    2003 18' Xpress H56, 2022 Tohatsu MFS140 / Serial #071184BB

  7. Member
    Join Date
    Apr 2022
    Location
    Lafayette, La.
    Posts
    133
    2003 18' Xpress H56, 2022 Tohatsu MFS140 / Serial #071184BB

  8. Member
    Join Date
    Jun 2013
    Location
    LONGVIEW TEXAS
    Posts
    14,037
    #8
    looks like a POWERTECH , personaly i dont think it needs jackplate ,adding to problem of porpose , get someone to set as far forward as safe to do or add weight to bow some how , talk to manufacture about set up and others with same boat in boat forums on here , good luck , ... NOTE i dont like 4 blades and you may need wedges added to rear of hull
    .................................................. ...the scariest thing in life is the unknown ...................................

  9. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    95,253
    #9
    Moving your post to the 2.5L Forum (correct location for posts on your engine).


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor