Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Aug 2013
    Location
    Seven Springs, NC
    Posts
    64

    2003 Erude E225FHLSTA not charging?

    How can I tell if motor is charging cranking battery?

  2. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #2
    Digital voltmeter attached to the battery posts while motor has been running a while. 14.5V when battery is fully charged Should read above 12.6 volts if battery is low
    -----


    A Technical troubleshooter possessing more tools than talent !

  3. Member
    Join Date
    Aug 2013
    Location
    Seven Springs, NC
    Posts
    64
    #3
    Thank you.
    and what would most likely be the culprit if not charging? Is this a stator function?

  4. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #4
    stator, regulator, battery, wiring, connections or a combination thereof
    -----


    A Technical troubleshooter possessing more tools than talent !

  5. Member
    Join Date
    Aug 2013
    Location
    Seven Springs, NC
    Posts
    64
    #5
    All that I get, except for the regulator. Can’t find it on the wiring or parts diagram. Where is it located on the motor?

  6. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #6
    It is an internal part of the EMM module and lucky for you the FICHT EMMs are repairable.
    -----


    A Technical troubleshooter possessing more tools than talent !

  7. Member
    Join Date
    Aug 2013
    Location
    Seven Springs, NC
    Posts
    64
    #7
    That explains why I couldn’t find it.
    Thanks for the expertise! Always appreciated.