Can’t find soild upper motor mounts
for a 2008 250 etec.
Can’t find soild upper motor mounts
for a 2008 250 etec.
Not a factory item have to be custom made, did you try the guys on ScreamNFly? Call Monty racing and see if Gordon knows of anyone that makes them.
I have ran solids in my motors before. Unless you are building a high performance engine/racing/ect....they are useless and aggravating in a normal bassboat IMHO. You can feel every vibration, shake, rattle, ect from your motor. Just curious why you want them?
Age and treachery will always overcome youth and skill !!
My boat is running at an angle. Somebody told me that it was possibly the motor mounts. At the same person told me to get solid ones. I’m not so sure that it is the motor mounts. Still investigatingOriginally Posted by omcforever
You mean the boat is leaning over or listing at cruise / high speed? Please offer more detail on this condition.
Yes exactly what you said. Sorry for the confusion
Doubtful for the motor mounts. Original mounts will be adequate.
Next question then. What has been done to check for anomalies in the hull?
Can we assume this is a new situation and that the boat has not exhibited this condition in the past?
A hook in the hull or other deformity will cause the condition is more likely to be a culprit.
What about a depth transducer?
Maybe the famous Stratos lean?
Does it just lean to one side at lower to medium speeds?
2000 Javelin Renegade 20 DC.
Strong men create easy times, Easy times create weak men & weak men create hard times. Sheikh Rashid bin Saeed Al Maktoum
In 1944 18-20 year old's stormed beaches, and parachuted behind enemy lines to almost certain death.
In 2015 18-20 year old's need safe zones so people don't hurt their feelings. "Author Unknown"
In 2021 18-40 year old's want to and work to cancel you out if you have a different opinion.
idid change some things but I found some bolts from my motor to the jack plate that were not completely tight.
All speeds
Motor mounts will not cause this list / lean as described. There is a weight balance issue or other hull problems.
Reply With Quote