Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Dec 2006
    Location
    Marion, IA
    Posts
    62

    cable length for flow-rite drain valve

    I have a 2008 Champion 200 Elite. I need to replace the existing Flow-Rite actuator, cable and drain valve. I know the parts I need. Anybody with a similar year and size boat know what the cable length is from the actuator (located at the helm) to the drain valve? My son will assist me the install. He lives 4 hours away. I'm too old to try and wrestle group 31 AGM batteries around. The problem is it will need to be done on a Sunday so I won't be able to measure the length of the cable ahead of time.

  2. Member SJSharky00's Avatar
    Join Date
    Dec 2019
    Location
    Carmichael, CA Langston, AL
    Posts
    786
    #2
    I installed the 10' cable in my 2007 210. The control is mounted at the helm next to the live well valve.
    That was for a remote drain plug. The existing drain plug for the live well I am not sure. but would have to be between the 6-8ft range.
    Last edited by SJSharky00; 05-10-2022 at 03:16 PM.

  3. Member
    Join Date
    Dec 2006
    Location
    Marion, IA
    Posts
    62
    #3
    Thanks. The cable needed is for the livewell remote drain valve.