Hoping to launch my boat w/ my new to me Twin '05 175 Evinrude Vindicators for the 1st time Thursday afternoon.
Been working on the install since November, have done ALL the work myself thus far.
This is what I have done to prepare (not necessarily in order):
1) Changed/indexed plugs
2) Changed fuel filters (both on the engines and on the boat)
3) Replaced oil Filters
4) Replaced exhaust pressure sensors
4) Rebuilt water pumps w/ full kits
5) Changed Gear oil
6) Checked all systems functioning on System Check Gauge (Temp, low/no oil, etc.)
7) Primed oil system through return line to oil tank
8) Started both engines and verified proper shifting and water flow
9) Flushed engines
10) Greased all fittings and checked trim fluid level
11) installed 1000MCA Batteries X2
12) Added Carbon Guard to Fuel
If anyone sees something I may have missed please don't hesitate to say so...........
Hope to post good news after my first ride!
5.10.jpg