Hello,
Hoping to find some help.
Everything worked last season perfectly. Graphs were put away and kept warm all winter in this tundra hole I live in.
On the bow is a Solix 12 MDI G2. Also a MinnKota Ulterra 112 MSI.
Solix 12 SI on the dash.
Everything is networked.
For some reason, the bow Solix 12 MDI G2 now refuses to connect to the side imaging on the Ulterra. It won't let me select this as an option in sonar settings, and it had sent error messages asking to connect to the bow Solix 12 SI and transducer at rear of boat.
The down imaging and regular sonar options work fine on the Ulterra.
I inspected all pins, connections, everything. I cannot find any problems.
I swapped the Solix SI head to the bow, and this will allow me to select to use the Ulterra side imaging without issues. With this in mind, the Solix MDI G2 clearly has an issue somewhere as it won't acknowledge the SI option on the Ulterra.
I went through and reset the default settings without success.
I updated all the software in the Ulterra and the Solix's to 4.020
Hard reset?
Any help is much appreciated!