Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    May 2020
    Location
    New York
    Posts
    112

    FXR in hull ducer

    Getting ready to install the in hull ducer for my Solix on a 2020 FXR. I have heard it is difficult to find a good spot and that it’s 50/50 if it will work correctly. Anyone have experience or good results to share. Any advice would be great, thanks.

  2. Member
    Join Date
    Jun 2017
    Location
    Ct
    Posts
    590
    #2
    What's wrong with the factory one already installed?

  3. Member
    Join Date
    May 2020
    Location
    New York
    Posts
    112
    #3
    Humminbird XP 14 HW

    In-hull Transducer








  4. Member
    Join Date
    May 2020
    Location
    New York
    Posts
    112
    #4
    If the factory installed this I can’t find it.

  5. Member
    Join Date
    Jun 2017
    Location
    Ct
    Posts
    590
    #5
    Unless your boat was a FXR select, the console unit has a SI transducer under the jackplate, A through hull transducer, both hooked to a y cable then the unit. You may just need a new y cable for solix, if the boat was a Limited and came with helix units. If you do not have a through hull then contact your dealer because it is suppose to