I have a 98 Trailer that needs a cap for the brake fluid fill. It’s one of the surge brake trailers. Anyone know where I can get one and what size will work. Looked at the BC parts and didn’t see one listed
I have a 98 Trailer that needs a cap for the brake fluid fill. It’s one of the surge brake trailers. Anyone know where I can get one and what size will work. Looked at the BC parts and didn’t see one listed
etrailer? trailerpartsdepot? Maybe Dexter.................I was online this am looking for a bolt size on my caliper so had these in my cache.
https://www.easternmarine.com/ufp-trailer-disc-brakes
https://needatrailerpart.com/product...er-boat-marine
https://www.dexteraxle.com/product/1...brake-axle-kit
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
Call Bass cat parts. That's where I got mine.
Copy That will be my next call. Thanks.
So I was unable to get another cap. It’s no longer made. What I did was weld a 1 inch pipe over the fill hole and put a metal cap on it. My question is Looking at the old cap it kinda looks like the cap may have been vented but not sure. Any input?
Yes, they are vented
Dang I was afraid of that. Do you think I could drill a small vent hole in the top maybe put a small one way valve?
Also if this issue is not an easy fix on the cap deal. What is a good replacement actuator It will need to have the backup lockout due to a steep driveway that I back up. It’s a drum system. Would have to have it done somewhere looks like it will have to be cut off maybe Richard from Basscat?
Last edited by BASSATTACK83; 05-19-2022 at 07:55 PM.
About any welding shop can replace a coupler/actuator. Venting the cap by drilling will work and rebuilding the master cylinder can be done.
Reply With Quote